Fire alarm cables are suitable for use in vertical run in a shaft or from floor to floor. Ideally used in fire risk locations: high rise buildings, bus-surface, underground rail & metro systems.

Type FPL-power limited fire alarm cable is listed by the NEC as being suitable for general purpose fire alarm use. This listing excludes installation in riser, ducts, plenums and other spaceused for environmental air unless the cable is installed in conduit. All FPL cables are listed as being resistant to the spread of fire and must pass both UL test 1424 and the vertical flame test UL1581

Type FPLR-FPLR power-limited fire alarm riser cable is listed as being suitable for use in a vertical run in a shaft or from floor to floor. All FPLR cables are listed as having fire-resistant characteristics capable of preventing fire from traveling from floor to floor. Riser cables must pass both UL test 1424 and vertical riser test UL 1666

Conductor:

Annealed Solid bare copper

Insulation:

PVC

Jacket:

Red PVC

Suitable for use from -20ºC to +75ºC

Every 2 feet sequential marking

Include ripcord

Applications:

Wiring of fire alarms

Smoke detectors

Voice communications

Burglar alarms

Fire protective circuits

Suggested voltage rating: 300V

Compliances:

UL type FPL FPLR